GET THE SET-UP APP  

One app for all devices: Download and install the Set-Up App applicable to your device by clicking the button below.

   

  QUICK START GUIDE  

  USER'S GUIDE  

• TIMEBAR User Manual EN (Firmware Version V 1.0.2 / V 1.1 - 23.07.2024)
  

• TIMEBAR User Manual DE ( Firmware Version V 1.0.2 / V 1.1 - 23.07.2024)

• TIMEBAR Frequently Asked Questions, Other Downloadable Manuals, Setup Software and Diagrams.

  TIMEBAR Firmware 1.1.0 Upgrade Guide  

Features:

• Added support for TIMEBAR Timecode Slate

• Added support for MIDI Timecode (MTC) over USB

• Fix bug regarding Display Auto Orientation

Download: TIMEBAR firmware 1.1.0 update app (macOS/Windows)

Before you start:

• Make sure your TIMEBAR has sufficient battery. If your updating computer is a laptop, make sure it has sufficient battery or is connected to mains

• The Tentacle Sync Studio software (macOS) or the Tentacle Setup software (macOS/Windows) should not be running at the same time as the Firmware Update App.

Update procedure:

• Download the firmware update app, install it and open it

• Connect your TIMEBAR via USB cable to the computer and switch it on

• Wait for the update app to connect to your TIMEBAR

• If an update is needed, start the update by pressing the "Start Firmware Update" button

• The updater app will tell you when your TIMEBAR was successfully updated

• To update more TIMEBARs you have to close and start the app again

Note: Make sure you have the latest iOS/Android Setup App installed.

 

Source: Tentacle Sync Article by Nadine Neuneier